WASTEWHACKER
COMBI-CUT
The waste whacker combi-cut is a robust, low maintenance combined
chipper shredder. This highly mobile unit with its folding side
chipper chute for transportation, is ideal for the large garden,
small contractor and the hire trade. The vertical shredding
chute will accept bulky green waste, hedge trimming, etc. up
to 50 mm (2") diameter. Root balls with soil and small
stones will not damage the shredding flails. It will also shred
cardboard, paper, and polystyrene |
4
wheel trolley version chipping |
4
Wheel Trolley - Fast Tow road legal
Tractor PTO drive
From 185 kg
800 kg per hr
8.5 Hp Kohler petrol (Honda optional) One blade
24 Width II OOmm (44")
Height 1430 mm (57")
Length 1940 mm (78") |
| The
shredded material will vary in size according to the
number of outlet retaining bars placed on the machine and falls
directly onto the ground. The side chipping chute is for branch
and clean wood up to 75 mm (3") diameter. The chipper has
a single chipping blade on a spinning disc. Waste material is
again discharged on to the floor. Waste whacker combi-cuts are
powered by a 8.5 Hp Kohler electric start petrol engine. When
mounted on the four wheel trolley chassis the machine will pass
through most standard gateways, when in the transport position.A
PTO unit is also available and needs a tractor of 12-30 hp. |
| WASTE
WHACKER JUNIOR PTO The waste whacker junior is an industrial
shredder for the volume reduction of green and organic waste.
The dropping of the waste product into the feed hopper allows
the material to fall into the heavy duty destruction chamber.
This chamber will deal with material up to 60 mm (2.5")
and will discharge it onto the ground. To vary the size of the
shredded material the discharge outlet bars should be added
or removed. |
Junior,
Trolley mounted |
1/2
ton per hour.
24
500 kg.
15 hp Kohler Petrol (Optional diesel or 3 phase electric) |
Powered
as standard by a 15 hp Kohler petrol engine (diesel or electric
option available) the waste whacker junior will deal with hedge
trimmings, small branches, cardboard, paper, root balls, etc.
A PTO version of this unit is also available and requires a
tractor unit of 18-30 hp (540 rpm) and three point linkage.
Chassis Dimensions
4
Wheel Trolley 812mm (32")w x 1219mm (48")lth x I 524mm
(60")ht
Fixed Skid 609mm (24")w x 10 16mm (40")lth x 1397mm
(55")ht
Fast Tow Road Legal 1422mm (56")w x 2438mm (96")lth
x I 524mm (60")ht
|
HS
550WOODCHIPPER
The HS550 woodchipper has a 125mm (5") capacity. The chipped
material is blown out through the 180 degree directional top
chute. The quality woodchippings are suitable for bedding plant
display areas, countryside walkways or round children's play
equipment,as well as normal compost heap product. The standard
power supply is via a Kohler 20 hp petrol engine (diesel or
electric power optional). |
HS
550 Fast Tow |
125mm
(5")
2 Chipping Blades
180 Degree top chute
from 300kg
Reversible Hydraulic Power |
The
HS 550s are built to cover all current HSE regulations regarding
this type of equipment. An added security feature of the HS550
is the two dedicated fuel tanks. These allow the machine to
be stored separate from the fuels source making theft less attractive,
it also eliminates cross fuel contamination.When supplied on
the narrow 4 wheel trolley chassis this machine will pass through
most standards gateways. A fast tow road legal chassis is also
available. Rate of intake automatically metered by stress control
system fitted to the feed roller.
Chassis Engine Capacity Cutters Discharge Weight Feed Roller
4 Wheel Trolley - Fast Tow Road Legal Kohler Petrol 20hp (Diesel
or 3 phase electric)
|
|
|
This is only a small selection of the machinary avaliable
for sale. If you can't see what you need please phone
or e-mail us your requirments.
|
Prices listed may be subject to change without prior notice |
| |
|
